C90700 (SAE 65) Bronze Bars On Applied


All Categories > Continuous Cast Solid, Cored, Wearplate and Centrifugal Cast Bronze Bar > Continuous Cast Solid Bars > C90700 (SAE 65) Bronze Bars > View Items


	C90700 (SAE 65) Bronze Bars
	Check up to five results to perform an action.

	larger image		C90700 is a “GREEN” non-leaded alloy Tin Bronze CDA 907 SAE 65 89-11 ASTM B505 Bunting continuous cast bronze bars of C90700 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects. Solid bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs. Typical Properties: (Not to be used for specification purposes.) Copper: 88.00 – 90.00% Tin: 10.00 – 12.00% Lead: 0.50% max. Zinc: 0.50% max. Physical Properties: Continuous Cast Tensile Strength PSI: 40,000 min. Yield Strength PSI: 25,000 min. Elongation: 10% min. Brinell Hardness (500 kg load): 100 typical Machinability Rating: 20 Minimum Operating Temperature: -450°F Maximum Operating Temperature: 550°F C90700 is used for bearings and gears where higher strength and load-carrying ability is required. C90700 has good wear resistance but should be used with hardened steel shafts (300-400 HB). Due to the lack of lead, this material requires constant lubrication, generally grease.

Results Per Page :

C90700 (SAE 65) Bronze Bars