C90300 is a “GREEN” non-leaded alloy Tin Bronze – Navy G QQC-390B Type II and Type III CDA 903 SAE 620 88-8-0-4 ASTM B271
Solid bars are stocked 13" increments and 105" lengths, and are available in other lengths and nonstandard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.
Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.
Typical Properties: (Not to be used for specification purposes.) Copper: 86.00 – 89.00% Tin: 7.50 – 9.00% Lead: 0.30% max. Zinc: 3.00 – 5.00%
Physical Properties: Centrifugal Cast Tensile Strength PSI: 40,000 min Yield Strength PSI: 18,000 min. Elongation: 20% min. Brinell Hardness (500 kg load): 70 typical Machinability Rating: 30 Minimum Operating Temperature: -450°F Maximum Operating Temperature: 550°F
C90300 is used for bearings, seal rings, gears, piston rings, pump impellers, steam fittings, and valve components. C90300 has good wear resistance but should be used with hardened steel shafts (300-400 HB). Due to the lack of lead, this material requires constant lubrication, generally grease.
