All Categories
>
Continuous Cast Solid, Cored, Wearplate and Centrifugal Cast Bronze Bar
>
Centrifugal Cast Cored Bars
>
C90300 (SAE 620)
Bronze Bars
>
Item # B903F040096
Item # B903F040096, C90300 (SAE 620) Centrifugal Cast Bronze Cored Bars
Printable Page
Email This Page
Save To Favorites
Please wait…
larger image
C90300 is a “GREEN” non-leaded alloy
Tin Bronze – Navy G QQC-390B Type II and Type III
CDA 903 SAE 620 88-8-0-4 ASTM B271
Solid bars are stocked 13" increments and 105" lengths, and are available in other lengths and nonstandard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.
Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.
Typical Properties:
(Not to be used for specification purposes.)
Copper: 86.00 – 89.00%
Tin: 7.50 – 9.00%
Lead: 0.30% max.
Zinc: 3.00 – 5.00%
Physical Properties: Centrifugal Cast
Tensile Strength PSI: 40,000 min
Yield Strength PSI: 18,000 min.
Elongation: 20% min.
Brinell Hardness (500 kg load): 70 typical
Machinability Rating: 30
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 550°F
C90300 is used for bearings, seal rings, gears, piston rings, pump impellers, steam fittings, and valve components. C90300 has good wear resistance but should be used with hardened steel shafts (300-400 HB). Due to the lack of lead, this material requires constant lubrication, generally grease.
Specifications
Nominal Size I.D.
5
in
Nominal Size O.D.
12
in
I.D. Min
4.8600
in
I.D. Max
4.8900
in
O.D. Min
12.1100
in
O.D. Max
12.1400
in
Min. Temperature
-450
ºF
Max. Temperature
550
ºF
P Value (Max.)
5000
V Value (Max.)
250
PV Value (Max.)
90000
