All Categories > Continuous Cast Solid, Cored, Wearplate and Centrifugal Cast Bronze Bar > Centrifugal Cast Cored Bars > C86300 (SAE 430B) Manganese Bronze Bars > Item # B863F052068  

Item # B863F052068, C86300 (SAE 430B ) Centrifugal Cast Manganese Bronze Cored Bars

    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

C86300 Manganese Bronze is a non-lead “GREEN” Alloy
Manganese Bronze CDA 863
SAE 430B
ASTM B271
Solid and cored bars are stocked in 13" increments and 144" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 60.00 – 66.00%
Zinc: 22.00 – 28.00%
Iron: 2.00 – 4.00%
Aluminum: 5.00 – 7.50%
Manganese: 2.50 – 5.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 110,000 min.
Yield Strength, PSI: 62,000 min.
Elongation: 14% min.
Brinell Hardness (3000 kg load): 225 typical
Machinability Rating: 80
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 400°F

C86300 Aluminum bronze is used for low speed, and very high load bearing applications. C86300 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide. Bunting also produces other Manganese Bronzes including C86200, C86400, C86500 and C86700.




 Specifications   

Nominal Size I.D.
6 1/2 in

Nominal Size O.D.
8 1/2 in

I.D. Min
6.3600 in

I.D. Max
6.3900 in

O.D. Min
8.6100 in

O.D. Max
8.6400 in

Min. Temperature
-450 ºF

Max. Temperature
400 ºF

P Value (Max.)
8000

V Value (Max.)
150

PV Value (Max.)
150000