All Categories
>
Continuous Cast Solid, Cored, Wearplate and Centrifugal Cast Bronze Bar
>
Centrifugal Cast Cored Bars
>
C93700 (SAE 64)
Bronze Bars
>
Item # B937F040088
Item # B937F040088, C93700 (SAE 64) Centrifugal Cast Bronze Cored Bars
Printable Page
Email This Page
Save To Favorites
Please wait…
larger image
High-Leaded Tin Bronze
CDA 937
SAE 64 83-10-10
ASTM B271
Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.
Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.
Typical Properties:
(Not to be used for specification purposes.)
Copper: 78.00 – 82.00%
Tin: 9.00 – 11.00%
Lead: 8.00 – 11.00%
Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 30,000 min.
Yield Strength, PSI: 12,000 min.
Elongation: 15% min.
Brinell Hardness (500 kg load): 60 typical
Machinability Rating 80
Minimum Operating Temperature -450°F
Maximum Operating Temperature 500°F
C93700 has higher tin and lead than C93200 and is used in bearings with higher speeds and loads. It has increased corrosion and oxidation resistance, with good anti-frictional properties, good load-carrying ability and excellent machinability. C93700 can be used in applications where lubrication may be low or interrupted.
Specifications
Nominal Size I.D.
5
in
Nominal Size O.D.
11
in
I.D. Min
4.8600
in
I.D. Max
4.8900
in
O.D. Min
11.1100
in
O.D. Max
11.1400
in
Min. Temperature
-450
ºF
Max. Temperature
500
ºF
P Value (Max.)
4000
V Value (Max.)
1000
PV Value (Max.)
85000
