All Categories > Continuous Cast Solid, Cored, Wearplate and Centrifugal Cast Bronze Bar > Centrifugal Cast Cored Bars > C93200 (SAE 660) Bronze Bars > Item # B932F048084  

Item # B932F048084, C93200 (SAE 660) Centrifugal Cast Bronze Cored Bars

    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B271
Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 30,000 min.
Yield Strength, PSI: 14,000 min.
Elongation: 15% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.




 Specifications   

Nominal Size I.D.
6 in

Nominal Size O.D.
10 1/2 in

I.D. Min
5.8600 in

I.D. Max
5.8900 in

O.D. Min
10.6100 in

O.D. Max
10.6400 in

Min. Temperature
-450 ºF

Max. Temperature
500 ºF

P Value (Max.)
4000

V Value (Max.)
750

PV Value (Max.)
75000