All Categories > Continuous Cast Solid, Cored, Wearplate and Centrifugal Cast Bronze Bar > Continuous Cast Solid Bars > C93700 (SAE 64) Bronze Bars > Item # B937S000020  

Item # B937S000020, C93700 (SAE 64) Continuous Cast Bronze Solid Bars

    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

High-Leaded Tin Bronze
CDA 937
SAE 64 83-10-10
ASTM B505

Bunting continuous cast bronze bars of C93700 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 78.00 – 82.00%
Tin: 9.00 – 11.00%
Lead: 8.00 – 11.00%

Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 6% min.
Brinell Hardness (500 kg load): 60 typical
Machinability Rating 80
Minimum Operating Temperature -450°F
Maximum Operating Temperature 500°F

C93700 has higher tin and lead than C93200 and is used in bearings with higher speeds and loads. It has increased corrosion and oxidation resistance, with good anti-frictional properties, good load-carrying ability and excellent machinability. C93700 can be used in applications where lubrication may be low or interrupted.




 Specifications   

Nominal Size I.D.
SOLID

Nominal Size O.D.
2 1/2 in

O.D. Min
2.5340 in

O.D. Max
2.5440 in

Min. Temperature
-450 ºF

Max. Temperature
500 ºF

P Value (Max.)
4000

V Value (Max.)
1000

PV Value (Max.)
85000