All Categories > Continuous Cast Solid, Cored, Wearplate and Centrifugal Cast Bronze Bar > Continuous Cast Solid Bars > C93200 (SAE 660) Bronze Bars > Item # B932S000013  

Item # B932S000013, C93200 (SAE 660) Continuous Cast Bronze Solid Bars

    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B505
Bunting continuous cast bronze bars of C93200 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 10% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.




 Specifications   

Nominal Size I.D.
SOLID

Nominal Size O.D.
1 5/8 in

O.D. Min
1.6560 in

O.D. Max
1.6660 in

Min. Temperature
-450 ºF

Max. Temperature
500 ºF

P Value (Max.)
4000

V Value (Max.)
750

PV Value (Max.)
75000