All Categories > Continuous Cast Solid, Cored, Wearplate and Centrifugal Cast Bronze Bar > Continuous Cast Cored Bars > C86300 (SAE 430B) Manganese Bronze Bars > Item # B863C008024  

Item # B863C008024, C86300 (SAE 430B) Continuous Cast Manganese Bronze Cored Bars


    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

C86300 Manganese Bronze is a non-lead “GREEN” Alloy
Manganese Bronze CDA 863
SAE 430B
ASTM B505

Manganese bronze is a very hard and strong bronze. Good applications include heavy earth moving equipment, roll neck bearings, and machine tool bearings.

Solid and cored bars are stocked in 13" increments and 144" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 60.00 – 66.00%
Zinc: 22.00 – 28.00%
Iron: 2.00 – 4.00%
Aluminum: 5.00 – 7.50%
Manganese: 2.50 – 5.00%

Physical Properties: Continuous Cast
Tensile Strength, PSI: 110,000 min.
Yield Strength, PSI: 62,000 min.
Elongation: 14% min.
Brinell Hardness (3000 kg load): 225 typical
Machinability Rating: 80
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 400°F

C86300 Aluminum bronze is used for low speed, and very high load bearing applications. C86300 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide. Bunting also produces other Manganese Bronzes including C86200, C86400, C86500 and C86700.





 Specifications   

Nominal Size I.D.

1 in

Nominal Size O.D.

3 in

I.D. Min

0.9050 in

I.D. Max

0.9450 in

O.D. Min

3.0550 in

O.D. Max

3.0750 in

Min. Temperature

-450 ºF

Max. Temperature

400 ºF

P Value (Max.)

8000

V Value (Max.)

150

PV Value (Max.)

150000