All Categories
>
Continuous Cast Solid, Cored, Wearplate and Centrifugal Cast Bronze Bar
>
Continuous Cast Cored Bars
>
C93700 (SAE 64)
Bronze Bars
>
Item # B937C012016
Item # B937C012016, C93700 (SAE 64) Continuous Cast Bronze Cored Bars
Printable Page
Email This Page
Save To Favorites
Please wait…
larger image
High-Leaded Tin Bronze
CDA 937
SAE 64 83-10-10
ASTM B505
Bunting continuous cast bronze bars of C93700 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.
Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.
Typical Properties:
(Not to be used for specification purposes.)
Copper: 78.00 – 82.00%
Tin: 9.00 – 11.00%
Lead: 8.00 – 11.00%
Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 6% min.
Brinell Hardness (500 kg load): 60 typical
Machinability Rating 80
Minimum Operating Temperature -450°F
Maximum Operating Temperature 500°F
C93700 has higher tin and lead than C93200 and is used in bearings with higher speeds and loads. It has increased corrosion and oxidation resistance, with good anti-frictional properties, good load-carrying ability and excellent machinability. C93700 can be used in applications where lubrication may be low or interrupted.
Specifications
Nominal Size I.D.
1 1/2
in
Nominal Size O.D.
2
in
I.D. Min
1.4360
in
I.D. Max
1.4800
in
O.D. Min
2.0340
in
O.D. Max
2.0440
in
Min. Temperature
-450
ºF
Max. Temperature
500
ºF
P Value (Max.)
4000
V Value (Max.)
1000
PV Value (Max.)
85000
