All Categories
>
Continuous Cast Solid, Cored, Wearplate and Centrifugal Cast Bronze Bar
>
Continuous Cast Cored Bars
>
C93200 (SAE 660)
Bronze Bars
>
Item # B932C005010
Item # B932C005010, C93200 (SAE 660) Continuous Cast Bronze Cored Bars
Printable Page
Email This Page
Save To Favorites
Please wait…
larger image
High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B505
Bunting continuous cast bronze bars of C93200 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.
Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.
Typical Properties:
(Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%
Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 10% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F
C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.
Specifications
Nominal Size I.D.
5/8
in
Nominal Size O.D.
1 1/4
in
I.D. Min
0.5610
in
I.D. Max
0.6050
in
O.D. Min
1.2810
in
O.D. Max
1.2910
in
Min. Temperature
-450
ºF
Max. Temperature
500
ºF
P Value (Max.)
4000
V Value (Max.)
750
PV Value (Max.)
75000
